NEC Univerge SV9100 - Page 191

Issue 4.0
SV9100 Programming Manual 2-151
05
Incoming Ring Pattern
Incoming Ring Pattern
0 = Normal Pattern
1 ~ 4 = Tone Pattern (1~4)
5 ~ 9 = Scale Pattern (1~5)
10 ~ 13 = Tone Pattern (5~8)
0 13-04-03
08
Memo 1
Define Memo Display information tied
to Common Speed Dial bin or
Telephone Book which match with
incoming Caller ID. This will be
displayed in LCD Line 1.
Maximum of 28 digits
No
Setting
15-02-58
09
Memo 2
Define Memo Display information tied
to Common Speed Dial bin or
Telephone Book which match with
incoming Caller ID. This will be
displayed in LCD Line 2.
Maximum of 28 digits
No
Setting
15-02-58
10
Memo 3
Define Memo Display information tied
to Common Speed Dial bin or
Telephone Book which match with
incoming Caller ID. This will be
displayed in LCD Line 3.
Maximum of 28 digits
No
Setting
15-02-58
11
Mailbox Number
Per Speed Dial Bin No. (0000~9999),
set the voice mail box number.
Incoming Caller ID number will be
checked with Speed Dial Data
(PRG 13-04-01). From matched
Speed Dial Bin No., the system finds
the voice mail box number according
to this PRG.
0 ~ 896
900 ~ 931
Station Mail Box (896) +
Group Mail Box (32) = 928
0
13
Large LED Illumination Setup (by
CID)
Define the color the large LED will
blink when Incoming call with
matching Caller ID is received.
1 = Not used
2 = Red
3 = Green
4 = Blue
5 = Yellow
6 = Purple
7 = Light Blue
8 = White
9 = Rotation
0 14-01-35
15-23-01
Item
No.
Item Input Data Default
Related
Program