NEC Univerge SV9100 - Page 314

Issue 4.0
2-274 Program 20 : System Option Setup
31
Connected Line Identification (COLP)
0 = Off
1 = On
00
32
Deny Multiple Barge-Ins
Allow/Deny an extension user from having multiple
users Barge into their conversation.
0 = Off
1 = On
00
33
Supervisor’s Position Enhancement
This option must be set to 1 for the operator to use
service codes in Program 11-13-10 ~ 11-13-13.
0 = Off
1 = On
0 0 11-13-10
11-13-11
11-13-12
11-13-13
34
Block Manual Off-Hook Signaling
Turn off or on an extension user ability to block off-hook
signals manually sent from a co-worker.
0 = Off
1 = On
00
35
Block Camp On
Turn off or on an extension user ability to block callers
from dialing to Camp On.
0 = Off
1 = On
00
36
Call Duration Timer Display
Turn off or on an extension display of the Call Duration
Time. The system waits until the interdigit time
(Program 21-01-01) expires before beginning this timer.
0 = Off
1 = On
11
37
--- Not Used ---
38
Headset Ringing for SLT
Turn off or on an extension user ability to use the
Headset ringing.
0 = Off
1 = On
00
39
Queue Status Display
Turn off or on the Queue Status Display for an
extension Class of Service. Any extension which has
this option enabled also receives the queue alarm.
0 = Off
1 = On
00
40
Do Not Disturb
Turn off or on an extension user ability to set or cancel
Do Not Disturb.
0 = Off
1 = On
1 1 11-11-08
15-07-03
41
Voice Mail Message Indication on DSS
Turn off or on the Voice Mail Message Indication for an
extension on a DSS console.
0 = Off
1 = On
00
42
Extension Data Swap Enabling
Turn off or on an extension user ability to use Extension
Data Swap.
0 = Off
1 = On
1 1 11-15-12
43
--- Not Used ---
44
Live Monitor Enabling
Turn off or on an extension user ability to use Live
Monitor.
0 = Off
1 = On
11
Item
No.
Item Input Data
Default
Related
ProgrammingCOS
01~14
COS
15