NEC Univerge SV9100 - Universal Answer;Auto Answer; Table

Issue 1.0
2-390 Program 23 : Answer Features Setup
Description
Use Program 23-03 : Universal Answer/Auto Answer to assign trunk routes (set in Program 14-06) to
extensions for Universal Answer. If the call ringing the paging system is in an extension assigned route,
the user can dial the Universal Answer code (
#0) to pick up the call.
You can also use this program to let an extension user automatically answer trunk calls that ring other
extensions (not their own). When the user lifts the handset, they automatically answer the ringing calls
based on Trunk Group Routing programming (defined in Program 14-06). The extension user ringing
calls, however, always have priority over calls ringing other co-worker extensions. Refer to the Line
Preference feature in the UNIVERGE SV9100 Features and Specifications Manual for more information.
Program 23 : Answer Features Setup
23-03 : Universal Answer/Auto Answer
Level:
IN
NOTE

Make one entry for each Night Service mode.
Input Data
Extension Number 001 ~ 960
Item
No.
Day/
Night
Mode
Route
Table
Number
Default Description
Related
Program
01 1~8 0~100 0
Let an extension user automatically
answer trunk calls that ring other
extensions. When the user lifts the
handset, they automatically answer the
ringing calls based on Trunk Group
Routing programming (defined in
Program 14-06).
14-06