NEC Univerge SV9100 - VRS;DISA Transfer Ring Group with Incorrect Dialing

Issue 4.0
SV9100 Programming Manual 2-405
Description
Use Program 25-03 : VRS/DISA Transfer Ring Group With Incorrect Dialing to set what happens to
a call when the DISA or Automated Attendant caller dials incorrectly or waits too long to dial. The call
can either disconnect (0) or Transfer to an alternate destination (a ring group or voice mail). When
setting the DISA and DID Operating Mode, make an entry for each Night Service mode.
Conditions
None
Feature Cross Reference

Direct Inward System Access (DISA)
Program 25 : VRS/DISA Setup
25-03 : VRS/DISA Transfer Ring Group With Incorrect Dialing
Level:
IN
Input Data
Trunk Port Number 001~400
Item
No.
Day/Night
Mode
Incoming Group Number Default
Related
Program
01 1~8
0 = Disconnect
1~100 = (Incoming Ring Group)
102 = (In-Skin/External Voice Mail or
VM8000 InMail)
104 = (Speed Dial Bin)
0 22-04