Issue 4.0
SV9100 Programming Manual 2-445
22 Internal All Call Paging None
23 Meet-Me Answer to Internal
Paging
None
24 Call Pickup None
25 Call Pickup for Another
Group
None
26 Call Pickup for Specified
Group
Call Pickup Group Number None
27 Speed Dial – System/Private Speed Dial Number
(Speed/Private)
None
28 Speed Dial – Group Speed Dial Number (Group) None
29 Repeat Redial
Rapid Blink (Red): Under a Repeat
Dial
30 Saved Number Redial None
31 Memo Dial None
32 Meet – Me Conference None
33 Override (Off-Hook
Signaling)
None
34 Barge – In No data or Extension No. (not
Virtual Extension) or
. In
case of
refer to the
Extension No. (not Virtual
Extension) set in 24-09-03.
None
35 Camp On
Red On: Under Camp-On or Reservation
36 Department Step Call None
37 DND/FWD Override Call None
38 Message Waiting None
39 Room Monitoring
Rapid Blink (Red): Under Monitored
Slow Blink (Red):
Under Monitoring
With Room Monitor there are two parties in
the monitor, one being monitored and one
who is monitoring. The same key is used
on both phones, but the COS says if the
key is set to be either a monitored or
monitoring party.
40 Handset Transmission Cutoff
Red On: Transmission cut-off
Function Number List (Continued)
[1] General functional level (00~99)
Function
Number
Function Additional Data LED Indication
To Next Page
Loading...
