NEC Univerge SV9100 - Trunk Group Routing for E&M Tie Lines

Issue 4.0
2-476 Program 34 : Tie Line Setup
Description
Use Program 34-03 : Trunk Group Routing for E&M Tie Lines to assign the trunk group route 1~8 or
1~100) chosen when a user seizes a Tie Line and dials 9. (Set Trunk Group Routing in Program 14-07.)
If the system has Automatic Route Selection, dialing 9 accesses ARS. Make a separate entry for each
Tie Line – for each Night Service Mode.
Conditions
None
Feature Cross Reference

Tie Lines
Program 34 : Tie Line Setup
34-03 : Trunk Group Routing for E&M Tie Lines
Level:
IN
Input Data
Trunk Port Number 001~400
Item
No.
Day/
Night
Mode
Route Table
Number
Default
01 1~8 0~100
0 = No Setting
1