NEC Univerge SV9100 - E&M Tie Line Toll Restriction Class

Issue 4.0
SV9100 Programming Manual 2-477
Description
Use Program 34-04 : E&M Tie Line Toll Restriction Class to enter a Toll Restriction Class for each
Tie Line. There are 15 Toll Restriction Classes which are defined in Programs 21-05 and 21-06. For
each Tie Line, you make a separate Toll Restriction Class entry for each Night Service mode.
Conditions
Program 20-06 cannot be used to assign Toll Restriction to Tie Lines.
Feature Cross Reference

Tie Lines
Program 34 : Tie Line Setup
34-04 : E&M Tie Line Toll Restriction Class
Level:
IN
Input Data
Trunk Port Number 001~400
Item
No.
Day/Night
Mode
Toll
Restriction
Class
Default
Related
Program
01 1~8 1~15 2 21-05
14-01-08