NEC Univerge SV9100 - Additional Dial Table

Issue 4.0
SV9100 Programming Manual 2-557
Description
Use Program 44-06 : Additional Dial Table to set the additional dial table to add prior to the dialed ARS/F-
Route number. The Additional Dial Table used is determined in Program 44-05-03.
Conditions
None
Feature Cross Reference

Automatic Route Selection (ARS)
Program 44 : ARS/F-Route Setup
44-06 : Additional Dial Table
Level:
IN
Input Data
Additional Dial Table Number 1~1000
Item
No.
Additional Dial Default
01
Up to 24 digits
Enter: 1~9, 0,
, #, Pause (press LK 1 to enter a pause)
No Setting