NEC Univerge SV9100 - In-DHCP Server Setup

Issue 4.0
2-28 Program 10 : System Configuration Setup
Description
Use Program 10-13 : In-DHCP Server Setup to setup the DHCP Server built into the GCD-CP10 blade.
Conditions
None
Feature Cross Reference

Voice Over Internet Protocol (VoIP)
Program 10 : System Configuration Setup
10-13 : In-DHCP Server Setup
Level:
SA
Input Data
Item
No.
Item Input Data Default Description
01
DHCP Server
Mode
0 = Disable
1 = Enable
0
Enable/Disable the built-in DHCP
Server.
02
Lease Time
Days 0~255
0 day
Lease Time of the IP address to a
client.
 Press the Transfer Key
to increment to the next
setting data.
Hour 0~23
0 hour
Minutes 1~59
30 minutes
05
Last DHCP Data
0 = Disable
1 = Enable
1
If 10-13-01 is enabled, this setting
determines if DHCP resource is
enabled or disabled.
When enabled, the system does
not update DHCP (Option 54
DHCP Server info) if 10-12-09 IP
Address is changed.