NEC Univerge SV9100 - Netlink System Control

Issue 4.0
SV9100 Programming Manual 2-665
Description
Use Program 51-14: NetLink System Control to delete system and slot information.
Conditions
None
Feature Cross Reference
None
Program 51 : NetLink Service
51-14 : NetLink System Control
Level:
IN
IMPORTANT
This program is available only via telephone programming and not through PC
Programming.
Input Data
System ID 1~50
Menu Number 1 = System information deletion
Item
No.
Item Input Data Default
01
Delete System Information
Delete system information and the slot information. The system
must be disconnected.
1~50 1