NEC Univerge SV9100 - DT800;DT700 Multiline Logon Information Setup

Issue 4.0
2-780 Program 84 : Hardware Setup for VoIP
Description
Use Program 84-22 : DT800/DT700 Multiline Logon Information Setup to set the DT700 Multiline
logon information.
Program 84 : Hardware Setup for VoIP
84-22 : DT800/DT700 Multiline Logon Information Setup
Level:
IN
Input Data
Personal ID Index 1~960
Item
No.
Item Input Data Default
01
User ID
Input the User ID when using manual or auto
registration (10-46-01).
Up to 32 characters
No Setting
02
Password
Input the Password when using manual or auto
registration (10-46-01).
 IP Multiline terminals only support
numerical user IDs, not alphanumeric.
Up to 16 characters
No Setting
03
User ID Omission
Input the Personal ID from terminal automatically
when log on again.
0 = Off
1 = On
0
04
Log Off
When the registration mode (10-46-01) is set to
manual, and the phone prompts for a login, the
previous user ID appears so the user only has to
enter the password.
When enabled, the extension assigned to the
Personal ID Index can be logged off or overridden
by another IP multiline station or Softphone.
In Manual mode, a user can also log off the IP
phone to allow another user to login with their own
login ID and password. To logoff the IP phone use
the following operation:
Press the "Down Arrow" Soft Key, press the
"Prog" soft key, and then press the "LOGOFF" soft
key.
0 = Off
1 = On
1