NEC Univerge SV9100 - Page 1052

1052
Program
Number
Program Name/Description
Input Data
Default
11-12-64
Service Code Setup (for Service Access) –
Security Sensor Mode Start
Service code + 1, after the timer (Program
20-55-01) passes, sensor signal is valid.
Service code + 0, sensor signal is invalid.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
819
13-04-01
Speed Dialing Number and Name – Speed
Dialing Data
Enter the System and Group Speed Dialing
numbers and names.
Maximum of 24 digits.
1 ~ 9, 0, *, #
Pause (Press line key 1)
Recall/Flash (Press line key 2)
@ = Code to wait for answer
supervision in ISDN (Press line
key 3)
No Setting
15-07-01
Programmable Function Keys
Assign a function key for Warning Message
(code
*
32).
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
15-07-01
Programmable Function Keys
Assign a function key for Sensor Mode (code
*
33).
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
20-01-19
System Options – Emergency Call Setting of
Remote Inspection Feature when the Target
is in Off-Hook Status
Assign to make an emergency call when the
inspection target is in off hook status.
0 = Not Call
1 = Call
0
20-08-23
Class of Service Options (Outgoing Call
Service) – Display Indication for Security
Sensor Detection
Enable(1) or Disable(0) an extension’s ability to
display indication for security sensor detection.
0 = Disable
1 = Enable
0
20-08-24
Class of Service Options (Outgoing Call
Service) – Display Indication for Emergency
Call by Remote Inspection
Enable(1) or Disable(0) an extension’s ability to
display indication for emergency call by remote
inspection.
0 = Disable
1 = Enable
0
20-21-05
System Option when Long Conversation –
Conversation Cutoff for Remote Monitor
0 ~ 64800 seconds
180
20-44-01
Watch Mode Setup – Internal Paging Group
for Watch Message
Define Internal paging group number for
Watching message.
0 = No Internal Paging
1 ~ 64 = Internal Paging Group
Number
0