NEC Univerge SV9100 - Page 1053

1053
Program
Number
Program Name/Description
Input Data
Default
20-44-02
Watch Mode Setup – External Paging Group
for Watch Message
Define External paging group number for
Watching message.
0 = No External Paging
1 ~ 8 = External Paging Group
Number
0
20-44-03
Watch Mode Setup – VRS Message for
Watch Mode
Define VRS number used for Watching
message.
0 = Send Warning Tone
1 ~ 100 = VRS Message
Number
0
20-44-04
Watch Mode Setup – Interval Timer for
Watch Message
Define interval time for sending Watching
message.
0 = No Message Send
1 ~ 60 (minutes)
0
20-45-01
Remote Watch Setup – Ring Terminal for
Remote Monitor
Assign Extension number for Remote
Inspection.
Terminal No. 1 ~ 6: Extension
Number (maximum of eight
digits)
No Setting
20-45-02
Remote Watch Setup – Ring Time Setting
Assign Ringing start time for Inspected
Extension.
Terminal No. 1 ~ 6: 0000 ~ 2359
0000
20-45-03
Remote Watch Setup – Ring Timer
Assign Ringing continue time for inspected
extension.
Terminal No. 1 ~ 6:
0 ~ 60
0
20-45-04
Remote Watch Setup – Auto Dial Number
Area Setting
Assign Speed dial area number when detect no
answer at extension and make emergency call.
Terminal No. 1 ~ 6: Speed Dial
Area
0 ~ 1999
0
20-45-05
Remote Watch Setup – VRS Message for
Answer
Assign VRS message number when inspected
extension answered.
Terminal No. 1 ~ 6:
0 = Send Warning Tone
1 ~ 100 = VRS Message
0
20-45-06
Remote Watch Setup – VRS Message for
Autodial
Assign VRS message number when
emergency call destination answered.
Terminal No. 1 ~ 6:
0 = Send Warning Tone
1 ~ 100 = VRS Message
Number
0
20-45-07
Remote Watch Setup – Time of Repeat
Autodial
Assign Repeat numbers for making emergency
call.
Terminal No. 1 ~ 6:
0 = No Redial
1 ~ 255 (times)
0
20-45-08
Remote Watch Setup – Auto Dial Calling
Time
Assign Calling continue time when making
emergency call.
Terminal No. 1 ~ 6:
0 = No Redial
1 ~ 3600 (seconds)
0
20-45-09
Remote Watch Setup – Interval of Auto Dial
Assign interval between Auto Dial when making
emergency call.
Terminal No. 1 ~ 6:
0 = No Call
1 ~ 3600 (seconds)
0