NEC Univerge SV9100 - Page 1054

1054
Program
Number
Program Name/Description
Input Data
Default
20-46-01
Security Sensor Setup – Sensor Mode
Define to use security sensor.
Security Sensor No.
1 ~ 8
0 = Disable
1 = Enable
0
20-46-02
Security Sensor Setup – Internal Paging
Group for Warning Message
Define Internal paging group number for
Warning message.
Security Sensor No.
1 ~ 8
0 = No Internal Paging
1 ~ 64 = Internal Paging Group
Number
0
20-46-03
Security Sensor Setup – External Paging
Group for Warning Message
Define External paging group number for
Warning message.
Security Sensor No.
1 ~ 8
0 = No External Paging
1 ~ 8 = External Paging Group
Number
0
20-46-04
Security Sensor Setup – VRS Message for
Warning
Define VRS number used for Warning
message.
Security Sensor No.
1 ~ 8
0 = Send Warning Tone
1 ~ 100 = VRS Message
Number
0
20-46-05
Security Sensor Setup – Auto Dial Number
Area Setting
Define Speed dial area number when sensor
detects warning.
Security Sensor No.
1 ~ 8
Speed Dial Area
0 ~ 1999
1999
20-46-06
Security Sensor Setup – VRS Message for
Answer
Define VRS message number when emergency
call destination answered.
Security Sensor No.
1 ~ 8
0 = Send Warning Tone
1 ~ 100 = VRS Message
Number
0
20-46-07
Security Sensor Setup – Auto Dial Wait
Timer
Define wait time before making emergency auto
dial.
Security Sensor No.
1 ~ 8
0 = Immediate Call
1 ~ 64800 seconds
10
20-46-08
Security Sensor Setup – Repeat Dial Times
Define repeat numbers for making emergency
call.
Security Sensor No.
1 ~ 8
0 = No Redial
1 ~255 (times)
0
20-46-09
Security Sensor Setup – Auto Dial Calling
Time
Define calling continue time when making
emergency call.
Security Sensor No.
1 ~ 8
0 = No Call
1 ~ 3600 seconds
120
20-46-10
Security Sensor Setup – Monitored Terminal
Define extension number for monitor from
outside. IP terminal cannot set as monitored
extension.
Security Sensor No.
1 ~ 8
Extension Number (maximum of
eight digits)
No Setting