NEC Univerge SV9100 - Page 1062

1062
Terminals
All Multiline Terminals with Display
Required Component(s)
None
Related Features
 Do Not Disturb
 Programmable Function Keys
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-11-14
Service Code Setup (for Setup/Entry
Operation) – Text Message Setting
Define the service code used when setting a
text message.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
No Setting
15-07-01
Programmable Function Keys
Assign a function key for Text Message (code
18). The Text Message key automatically
selects the message used when programming
the key.
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
20-01-02
System Options – Text Message Mode
Select whether an intercom caller should hear
busy (1) or ring through (0) for extensions which
have Selectable Display Messaging set.
Any extension previously set with Selectable
Display Messaging must cancel the feature and
reactivate for a change in this option to take affect.
0 = Call mode
1 = No Answer/Busy mode
1
20-02-07
System Options for Multiline Telephones –
Time and Date Display Mode
Set the System Time and Date display mode.
The time that displays in Selectable Display
Messages follows this setting.
1 ~ 8
Type 1 = (12 hour) 10 MAR TUE
3:15PM
Type 2 = (12 hour) 3:15PM MAR
10 TUE
Type 3 = (12 hour) 3-10 TUE
3:15 PM
Type 4 = (12 hour) 3:15PM TUE
10 MAR
Type 5 = (24 hour) 10 MAR TUE
15:15
Type 6 = (24 hour) 15:15 MAR
10 TUE
Type 7 = (24 hour) 3-10 TUE
15:15
Type 8 = (24 hour) 15:15 TUE
10 MAR
3