NEC Univerge SV9100 - Page 1108

1108
Related Features
 Account Code Entry
 Automatic Route Selection (ARS)
 Central Office Calls, Placing
 Code Restriction
 Dial Tone Detection
 One-Touch Calling
 PBX Compatibility
 Programmable Function Keys
 Single Line Telephones, Analog 500/2500 Sets
 Trunk Group Routing
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
10-09-01
DTMF and Dial Tone Circuit Setup
If dial tone detection is enabled, allocate at
least one circuit for dial tone detection (Type 0
or 2).
0 = Common Use
1 = Extension Only
2 = Trunk Only
Circuit/Resource
01 ~ 08 = 1
(Extensions)
Circuit/Resource
09 ~ 32 = 2
(Trunks)
Circuit/Resource
33 ~ 144 = 0
(Common)
When
GPZ-BS10 is
installed, 81 ~
144 are available
11-10-04
Service Code Setup (for System
Administrator) – Storing Common Speed
Dialing Numbers
Customize the service code used for storing
Common Speed Dialing Numbers
MLT
0 ~ 9,
*
, # Maximum of eight
digits
853
11-10-05
Service Code Setup (for System
Administrator) – Storing Group Speed
Dialing Numbers
Customize the service code used for storing
group speed dialing numbers.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
854
11-11-39
Service Code Setup (for Setup/Entry
Operation) – Station Speed Dial Number
Entry
Customize the service code used for entering
station speed dial numbers.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
855