NEC Univerge SV9100 - Page 1200

1200
Program
Number
Program Name/Description
Input Data
Default
20-11-22
Class of Service Options (Hold/Transfer
Service) – Restricted Unsupervised
Conference
Allow/Deny an extension user ability to initiate
an unsupervised conference.
0 = Allow
1 = Deny
COS 1 ~ 15 = 0
20-13-08
Class of Service Options (Supplementary
Service) – Conference
Turn Off or On extension user ability to initiate a
conference or Meet Me Conference.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-10
Class of Service Options (Supplementary
Service) – Barge-In Monitor
Enable the extension Barge-In Mode to be
speech or Monitor mode.
0 = Speech
1 = Monitor
COS 1 ~ 15 = 0
24-02-07
System Options for Transfer – Trunk-to-
Trunk Transfer Release Warning Tone
This timer starts when a trunk begins talking
with another trunk (for example: Trunk-to-Trunk
Transfer, outgoing from trunk, Tandem
Trunking).
When this time expires, a warning tone is
heard. If Program 24-02-10 is set, the
conversation disconnects after time expires.
This time is set again when the external digit
time expires. One of the trunks used must be
an analog trunk (or leased line).
0 ~ 64800 seconds
1800
24-02-10
System Options for Transfer – Disconnect
Trunk-to-Trunk
This timer starts after the Trunk-to-Trunk
warning tone is heard.
0 ~ 64800 seconds
0
25-07-07
System Timers for VRS/DISA – Ling
Conversation Warning Tone Time
Determine the time a DISA caller or any trunk-
to-trunk (such as Tandem Trunking)
conversation can talk before the Long
Conversation tone is heard.
0 ~ 64800 seconds
3600
25-07-08
System Timers for VRS/DISA – Long
Conversation Disconnect Time
Determine the time the system waits before
disconnecting a DISA caller or any
trunk-to-trunk (such as Tandem Trunking)
conversation call after the Long Conversation
tone is heard.
0 ~ 64800 seconds
10