NEC Univerge SV9100 - Page 1214

1214
Terminals
SV9100 Multiline Terminals and SV9100 SIP Multiline Terminals
Required Component(s)
GCD-CP10 should have LAN connection ability
Compatible system software version
PC Driver for the 1st-Party TAPI over Ethernet (CTE): PC running Windows XP 32-bit, or
Windows 7 32-bit and 64-bit or Windows 8 32-bit and 64-bit.
PC Driver for 3rd Party TAPI: PC Running Windows Server 2003 32-bit, Windows 2008
32-bit, Windows 2008 R2 64-bit, or Windows 2012 64-bit.
A TAPI compatible Windows application
Related Features
Headset Operation
Guide to Feature Programming
 The items highlighted in gray are read only and cannot be changed.
Program
Number
Program Name/Description
Input Data
Default
10-12-01
GCD-CP10 Network Setup – IP Address
Assign the IP Address.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
192.168.0.10
10-12-02
GCD-CP10 Network Setup – Subnet Mask
128.0.0.0 | 192.0.0.0 | 224.0.0.0
255.255.0.0
The setting of Subnet Mask is invalid when all
|240.0.0.0 | 248.0.0.0 | 252.0.0.0
Host Addresses are 0.
|254.0.0.0 | 255.0.0.0
If the network section is:
0,
|255.128.0.0 | 255.192.0.0
|255.224.0.0 | 255.240.0.0
|255.248.0.0 | 255.252.0.0
127,
|255.254.0.0 | 255.255.0.0
128.0,
|255.255.128.0 | 255.255.192.0
191.255,
192.0.0,
223.255.255
The setting of Subnet Mask is invalid.
|255.255.224.0 | 255.255.240.0
|255.255.248.0 | 255.255.252.0
|255.255.254.0 | 255.255.255.0
|255.255.255.128
|255.255.255.192
|255.255.255.224
|255.255.255.240
|255.255.255.248
|255.255.255.252
|255.255.255.254
|255.255.255.255
10-12-03
GCD-CP10 Network Setup – Default
Gateway
Assign the default gateway IP address for the
GCD-CP10.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0