NEC Univerge SV9100 - Page 1235

1235
Program
Number
Program Name/Description
Input Data
Default
14-06-01
Trunk Group Routing – Priority Order
Number
Set the priority order number 1 ~ 4.
0 = Not Specify
1 ~ 100: (Trunk Group Number)
101 ~ 150: (100 + Networking
System Number)
1001 ~ 1100: (1000 + Route
Table Number)
Route 1, Order
Number 1 = 1
(Trunk Group 1)
Order Numbers
2, 3, 4 = 0 (Not
Specified)
All Other Routes
(2 ~ 100) and
Order Numbers
(1 ~ 4) = 0 (Not
Specified).
14-07-01
Trunk Access Map Setup – Trunk Port
Number
Assign trunks to Access Maps.
0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on
Hold
4 = Outgoing access and access
when trunk on Hold
5 = Incoming access and access
when trunk on Hold
6 = Incoming and Outgoing
access
7 = Incoming access, outgoing
access and access when trunk
on Hold
Trunk Access Maps: 1 ~ 400
Access Maps
1 ~ 400 = Trunk
Ports 1 ~ 400
assigned with
option 7 access
(incoming and
outgoing access
and access
when trunk is on
Hold).
15-06-01
Trunk Access Map for Extensions
Assign Access Maps to extensions.
Trunk Access Maps: 1 ~ 400
1
15-07-01
Programmable Function Keys
Assign function keys for trunk group access
(code *02 + group) or Call Appearance (CAP)
Keys (code *08 + CAP Key orbit 0001 ~ 9999
(or 0000 for auto assign).
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
20-02-02
System Options for Multiline Telephones –
Trunk Group Access Key Operating Mode
Set the operating mode of the extension trunk
group keys.
0 = Outgoing / Incoming
1 = Outgoing
2 = Incoming
0
20-29-01
Timer Class for Extension – Day/Night Mode
1~8, Class Number
Assign the timer class to each extension. There
are 16 Classes that can be assigned. You make
eight entries for this Program, one for each
Night Service Mode. This entry includes virtual
extension numbers.
0 ~ 15
0 = Not assigned
0
20-31-04
Timer Class Timer Assignment – Intercom
Interdigits Time (Intercom I/D Timer)
When placing Intercom calls, extension users
must dial each digit in this time.
0 ~ 64800 seconds
10
21-01-02
System Options for Outgoing Calls –
Intercom Interdigit Time
When placing Intercom calls, extension users
must dial each digit in this time.
0 ~ 64800 seconds
10