NEC Univerge SV9100 - Page 1242

1242
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-12-04
Service Code Setup (for Service Access) –
Set Camp-On
Customize the Service Code used for setting
Camp-On.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
850
11-12-05
Service Code Setup (for Service Access) –
Cancel Camp-On
Customize the Service Code, used for
cancelling Camp-On.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
870
11-16-05
Single Digit Service Code Setup – Camp-On
Customize the 1-digit Service Code used for
setting Camp-On.
0 ~ 9,
*
, # Maximum of one digit
#
15-07-01
Programmable Function Keys
Assign a function key for Trunk Queuing and
Trunk Camp-On (code 35).
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
20-01-08
System Options – Trunk Queuing Callback
Time
Set the Trunk Queuing Callback Time. Trunk
Queuing Callback rings an extension for this
time.
0 ~ 64800 seconds
15
20-01-09
System Options – Callback/Trunk Queuing
Cancel Time
Set the Callback/Trunk Queuing Cancel Time.
The system cancels an extension Callback or
Trunk Queuing request after this time.
0 ~ 64800 seconds
64800
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-11-07
Class of Service Options (Hold/Transfer
Service) – Transfer Without Holding
Turn Off or On an extension user ability to use
Transfer Without Holding.
0 = Off
1 = On
COS 1 ~ 15 = 0