NEC Univerge SV9100 - Page 1395

1395
Program
Number
Program Name/Description
Input Data
Default
15-05-49
IP Telephone Terminal Basic Data Setup –
Receiving SIP INFO
Select whether or not system can receive
DTMF from standard SIP phone via SIP INFO
message.
0 = Disable
1 = Allowed any time
2 = Allowed while RTP is not
available
1
Off-Hook Signaling:
Program
Number
Program Name/Description
Input Data
Default
11-12-03
Service Code Setup (for Service Access) –
Override (Off-Hook Signaling)
Customize the override (off-hook signaling)
used for service access.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
709
20-09-01
Class of Service Options (Incoming Call
Service) – Second Call for DID/DISA/DIL/
E&M Override
Turn Off or On the extension ability to receive a
second call from a DID, DISA, DIL, or tie line
caller.
With this option set to 1, the destination
extension must be busy for a second DNIS caller to
ring through. If the destination extension does not
have a trunk or CAP key available for the second
call and a previous call is ringing the extension but
has not yet been answered, the second caller hears
busy regardless of this program setting.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-09-07
Class of Service Options (Incoming Call
Service) – Call Queuing
Turn Off or On an extension user ability to have
calls queued if a call rings the extension when it
is busy.
Program 20-13-06 must be set to 0 (Off) for
this feature to work.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-05
Class of Service Options (Supplementary
Service) – Intercom Off-Hook Signaling
Turn Off or On an extension ability to send
off-hook signals.
This setting functions with Programs 20-09-07
and 20-13-06 disabled.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-06
Class of Service Options (Supplementary
Service) – Automatic Off-Hook Signaling
(Automatic Override)
Allows a busy extension to Manually (0) or
Automatically (1) receive off-hook signals.
This setting is to receive incoming call
signaling information during call queuing.
0 = Off
1 = On
COS 1 ~ 15 = 1