NEC Univerge SV9100 - Page 1396

1396
Program
Number
Program Name/Description
Input Data
Default
20-13-54
Class of Service Options (Supplementary
Service) – Call Waiting for Standard SIP
Terminal
Set up Call waiting (Off-hook Signaling) for
Standard SIP terminal. When setting this
Program to enable, Program 20-13-05,
20-13-06 and Program 20-09-01, 20-09-07 also
need to be set to Enable.
0 = Disable
1 = Enable
0
20-17-01
Operator Extension – Operator’s Extension
Number
Define the extension numbers which are to be
used by operators.
Maximum of eight digits.
ext. 101
Caller ID Display After a Call Transfer:
Program
Number
Program Name/Description
Input Data
Default
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-11-06
Class of Service Options (Hold/Transfer
Service) – Unscreened Transfer (Ring
Inward Transfer)
Turn Off or On an extension user ability to use
Unscreened Transfer.
0 = Off
1 = On
COS 1 ~ 15 = 1
24-02-15
System Options for Transfer – SIP Out of
Range Timer
When not receiving any response within this
timer setting, system determines SIP terminal is
out of range. When set to 0, timer is invalid.
0 ~ 30 seconds
4
24-09-01
Call Forward Split Settings – Call
Forwarding Type
Type of Call Forwarding
0 = Call Forwarding Off
1 = Call Forwarding with both
ring
2 = Call Forwarding when no
answer
3 = Call Forwarding all calls
4 = Call Forwarding busy or no
answer
5 = Call Forwarding when busy
0