141
all Call Forwarding is cancelled.
Any settings in Programs 24-09-04 and 24-09-05, copies the information to Programs 24-09-02
and 24-09-03 and is changed to Call Forwarding Busy/No Answer.
When the following are done in sequence,
Call Forwarding Busy is set to extension
Call Forwarding Immediate is set on extension
Call Forwarding Immediate is cancelled on extension
then,
Call Forwarding Busy/No Answer is set back on the extension.
The @ and P characters are not supported in the call forward destination. These
characters are only supported on a one touch/DSS key and in speed dial bins.
If the terminal is configured for Call Forward Both Ring and DND is activated, the calling
station will receive a busy tone. Call Forward Both Ring is not followed.
If Program 20-11-30 is set to 0 (Off), the Call FWD setting is displayed on the terminal LCD
screen when idle.
Default Settings
Enabled
System Availability
Terminals
All Terminals and Virtual Extensions
Required Component(s)
None
Related Features
Call Forwarding with Follow Me
Call Forwarding, Off-Premise
Call Forwarding/Do Not Disturb Override
Central Office Calls, Answering
Department Calling
Direct Station Selection (DSS) Console
Do Not Disturb
Programmable Function Keys
Voice Response System (VRS)
To Next Page
Loading...
