144
Programmable Function Keys
Assign functions to multiline terminal line keys.
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
Class of Service Options (Incoming Call
Service) – Second Call for DID/DISA/DIL/
E&M Override
Turn Off or On an extension ability to receive a
second call from a DID, DISA, DIL, or tie line
caller.
With this option set to 1, the destination
extension must be busy for a second DNIS caller to
ring through. If the destination extension does not
have a trunk or CAP key available for the second
call and a previous call is ringing the extension but
has not yet been answered, the second caller hears
busy regardless of this program setting.
Class of Service Options (Incoming Call
Service) – Call Queuing
Turn Off or On an extension ability to have calls
queued if a call rings the extension when it is
busy.
Program 20-13-06 must be set to 0 (Off) for
this feature to work.
Class of Service Options (Hold/Transfer
Service) – Call Forward All
Turn Off or On an extension user ability to set
Call Forward Immediate.
Class of Service Options (Hold/Transfer
Service) – Call Forward When Busy
Turn Off or On an extension user ability to set
Call Forwarding when Busy.
Class of Service Options (Hold/Transfer
Service) – Call Forwarding When
Unanswered
Turn Off or On an extension user ability to set
Call Forwarding when Unanswered.
Class of Service Options (Hold/Transfer
Service) – Call Forwarding (Both Ringing)
Turn Off or On an extension user ability to set
Call Forwarding with Both Ringing.
To Next Page
Loading...
