145
Class of Service Options (Hold/Transfer
Service) – Call Forwarding with Follow Me
Turn Off or On an extension user ability to set
Call Forward with Follow Me.
Class of Service Options (Hold/Transfer
Service) – CAR/VE Call Forward Set/Cancel
Turn Off or On the ability to set and cancel Call
Forwarding for a CAR or Virtual Extension.
Class of Service Options (Hold/Transfer
Service) – Disable Call FWD Indication on
LCD
When set to On (1), Call FWD setting is not
shown on the terminal LCD.
Class of Service Options (Supplementary
Service) – Intercom Off-Hook Signaling
Turn Off or On an extension to send off-hook
Signals.
This setting functions with Programs 20-09-07
and 20-13-06 disabled.
Class of Service Options (Supplementary
Service) – Automatic Off-Hook Signaling
(Automatic Override)
Allow a busy extension user to manually (0) or
automatically (1) receive off-hook signals.
An example of an off-hook signal is the tone
heard when receiving a second call.
This setting is to receive incoming call
signaling information during call queuing.
System Options for Transfer – Delayed Call
Forwarding Time
Set the Delayed Call Forwarding interval. For
an unanswered call, Call Forward No Answer
occurs after this interval.
Call Forward Split Settings – Call
Forwarding Type:
Assign Call Forwarding Type and the
destination numbers for each extension/virtual
extension.
0 = No Call Forwarding
1 = Call Forward Both
2 = Call Forward No Answer 3 =
Call Forward All
4 = Call Forward Busy No
Answer
5 = Call Forward Busy
Call Forward Split Settings – CO Call
Forwarding Destination for Both Ring, All
Call, No Answer
Assign CO Call Forwarding Destination for ring,
all call and no answer.
Maximum of 24 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
To Next Page
Loading...
