NEC Univerge SV9100 - To Activate Call Forwarding Off-Premise for a Door Box; To Cancel Call Forwarding Off-Premise Split

167
To cancel Call Forwarding Off-Premise Split:
1. At the multiline terminal, press Speaker.
- OR -
2. At a single line telephone, lift the handset.
3. Dial the Call Forward Access Code (default not assigned).
4. Dial 0 (Cancel).
 If Internal and External are set both are canceled.
 Your DND or Call Forwarding (Device) Programmable Function key flashes.
Off-Premise Call Forwarding for Door Boxes
These operations are performed at the Door Box Ringing Extension only.
To activate Call Forwarding Off-Premise for a Door Box:
This option only works for ISDN PRI or BRI Trunks.
1. At the multiline terminal, press Speaker + dial SC 822.
- OR -
At the multiline terminal only, press Call Forward (Device) key (Program 15-07-01 or SC 851,
code 54).
- OR -
At the single line telephone, lift the handset + dial 822.
2. Dial the Door Box number (1~4).
3. Dial the Speed Dialing number where the calls should be forwarded.
4. Press Speaker (or hang up at the single line telephone) to hang up.