NEC Univerge SV9100 - Page 192

192
Program
Number
Program Name/Description
Input Data
Default
22-01-04
System Options for Incoming Calls – DIL No
Answer Recall Time
A DIL that rings its programmed destination
longer than this interval diverts to the DIL No
Answer Ring Group (set in Program 22-08).
0 ~ 64800 seconds
0 = No Overflow
0
22-02-01
Incoming Call Trunk Setup
Set the feature type for the trunk you are
programming.
Trunks 1 ~ 400
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode Switching
0
22-03-01
Trunk Ring Tone Range – Ring Tone Pattern
Assign Ring Tone Ranges to trunks. Trunks
ring extensions according to the Ring Tone
Range selected in Program 22-03-0 and the
settings made with either Service Code 720 or
Program 15-02-02.
0 = Ring Tone Pattern 1
1 = Ring Tone Pattern 2
2 = Ring Tone Pattern 3
3 = Ring Tone Pattern 4
4 = Melody 1
5 = Melody 2
6 = Melody 3
7 = Melody 4
8 = Melody 5
9 = Ring Tone Pattern 5
10 = Ring Tone Pattern 6
11 = Ring Tone Pattern 7
12 = Ring Tone Pattern 8
0
22-04-01
Incoming Extension Ring Group
Assignment
Assign extensions (up to 48) to Ring Groups.
Calls ring extensions according to Ring Group
programming. There are 100 available ring
groups.
Maximum of eight digits.
Extensions 101
~ 108 (first eight
ports) ring for
incoming Ring
Group 1 calls.
No other
extensions ring
for incoming
Ring Group 1
calls.
22-05-01
Incoming Trunk Ring Group Assignment
To have the trunks ring extensions, assign
trunks to a Ring Group. The incoming ring
group assignment programmed in Program
41-03-01 overrides the setting in this program.
Trunks 1 ~ 400
Incoming Group Number for
Day/Night Mode (1 ~ 8):
0 = (No Setting)
001 ~ 100 = (Incoming Group)
102 = (In-Skin/ External Voice
Mail or InMail)
103 = (Centralized VM)
1