NEC Univerge SV9100 - Page 231

231
Program
Number
Program Name/Description
Input Data
Default
21-01-17
System Options for Outgoing Calls –
Restriction Digit in Outgoing Disable on
Incoming Line
With the Outgoing Disable on Incoming Line
feature, determine the number of digits to be
dialed before the call should be disconnected.
Digits 1 ~ 9
4
21-04-01
Toll Restriction Class for Extensions
Assign a Toll Restriction class to an extension
for modes 1-8.
Day/Night Mode
1 ~ 9 (9 = Power Failure Mode)
Restriction Class 1 ~ 15
2
21-05-01
Toll Restriction Class – International Call
Restriction Table
For the Toll Restriction Class you select, Assign
or Unassign the International Call Restrict Table
(Program 21-06-01).
0 = Unassign (No)
1 = Assign (Yes)
1, 6 ~ 15 = 0
2 ~ 5 = 1
21-05-02
Toll Restriction Class – International Call
Permit Code Table
For the Toll Restriction Class you select, Assign
or Unassign the International Call Permit Table
(Program 21-06-02).
0 = Unassign
1 = Assign
1, 3 ~ 15 = 0
2 = 1
21-05-04
Toll Restriction Class – Maximum Number of
Digits Table Assignment
Select the table (defined in Program 21-06-03)
to be used to determine the maximum number
of digits allowed for outgoing calls.
1 ~ 4 =Table
0 =Disable (None)
1, 2, 6 ~ 15 = 0
3 = 1
4 = 2
5 = 3
21-05-05
Toll Restriction Class – Common Permit
Code Table
Choose whether the table set up by Program
21-06-04 is referred to, or not referred to.
0 = Unassigned
1 = Assigned
1, 8 ~ 15 = 0
2 ~ 7 = 1
21-05-06
Toll Restriction Class – Common Restriction
Table
Choose whether the table set up by Program
21-06-05 is referred to, or not referred to.
0 = Unassigned
1 = Assigned
1, 6 ~ 15 = 0
2 ~ 5 = 1
21-05-07
Toll Restriction Class – Permit Code Table
Set the tables 1 ~ 4 when referring to the table
set up by Program 21-06-06.
1 ~ 4 = Table
0 = Disable (None)
1, 2, 6 ~ 15 = 0
3 = 1
4 = 2
5 = 3
21-05-08
Toll Restriction Class – Restriction Table
Set the tables 1 ~ 4 when referring to the table
set up by Program 21-06-07.
1 ~ 4 = Table
0 = Disable (None)
0
21-05-09
Toll Restriction Class – Restriction for
Common Speed Dials
For the Code Restriction Class you select,
Enable (1) or Disable (0) Code Restriction for
Common Speed Dialing numbers.
0 = Does Not Restrict
1 = Following Restriction Check
0