NEC Univerge SV9100 - Page 235

235
Program
Number
Program Name/Description
Input Data
Default
11-11-34
Service Code Setup (for Setup/Entry
Operation) – Temporary Toll Restriction
Override
If required, change the service code (775) for
Temporary Toll Restriction Override.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
875
11-11-36
Service Code Setup (for Setup/Entry
Operation) – Toll Restriction Override
If required, change the service code (663) for
Toll Restriction Override.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
763
20-08-06
Class of Service Options (Outgoing Call
Service) – Toll Restriction Override
Turn Off or On Toll Restricting Override
(Service Code 775).
0 = Off
1 = On
COS 01 ~ 15 = 0
21-01-07
System Options for Outgoing Calls – Toll
Restriction Override Time
Set the Toll Restriction Override Time. After
dialing the Toll Restriction Override codes, the
system removes Toll Restriction for this Time.
0 ~ 64800 seconds
10
21-07-01
Toll Restriction Override Password Setup
Assign Toll Restriction Override codes to
extensions. Each code must have four digits,
using any combination of 0 ~ 9, # and *. Each
extension can have a separate code, or many
extensions can share the same override code.
Maximum four digits
(0 ~ 9, #, *)
No Setting
21-14-01
Walking Toll Restriction Password Setup –
User ID
Enter the Walking Toll Restriction Override User
ID codes (six digits) into tables. Up to 500
different override codes can be entered.
Dial (Six digits)
No Setting