236
SMDR Output Options – Toll Restricted Call
SMDR can include or exclude calls blocked by
Toll Restriction.
0 = Not Displayed
1 = Displayed
SMDR Output Options – PBX Calls
When the system is behind a PBX, SMDR can
include all calls or just calls dialed using the
PBX trunk access code.
0 = Not Displayed
1 = Displayed
SMDR Output Options – Trunk Number or
Name
Select whether the system should display the
trunk Name (0) or the Number (1) on SMDR
reports.
If this option is set to 0, Program 35-02-14
must be set to 0.
SMDR Output Options – Summary (Daily)
Set this option to (1) to have the SMDR report
provide a daily summary (at midnight every
night).
0 = Not Displayed
1 = Displayed
SMDR Output Options – Summary (Weekly)
Set this option to (1) to have the SMDR report
provide a weekly summary (every Saturday at
midnight).
0 = Not Displayed
1 = Displayed
SMDR Output Options – Summary (Monthly)
Set this option to (1) to have the SMDR report
provide a monthly summary (at midnight on the
last day of the month).
0 = Not Displayed
1 = Displayed
SMDR Output Options – Toll Charge Cost
Set this option to (1) have the SMDR report
include toll charges.
0 = Not Displayed
1 = Displayed
SMDR Output Options – Incoming Call
Enable this option (1) to have the SMDR report
include incoming calls. If you disable this option
(0), incoming calls do not print.
0 = Not Displayed
1 = Displayed
SMDR Output Options – Extension Number
or Name
Set this option (1) to have the SMDR report
include extension numbers. Set this option (0)
to have the SMDR report include extension
names.
SMDR Output Options – All Lines Busy
(ALB) Output
Determine if the All Lines Busy (ALB) indication
should be displayed.
0 = Not Displayed
1 = Displayed
SMDR Output Options – DID Table Name
Output
Determine if the DID table name should be
displayed.
0 = Not Displayed
1 = Displayed
To Next Page
Loading...
