EasyManua.ls Logo

NEC Univerge SV9100 - Page 370

NEC Univerge SV9100
1402 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
370
Program
Number
Program Name/Description
Input Data
Default
25-06-02
VRS/DISA One-Digit Code Attendant Setup
Destination Number
Set up single digit dialing for Automated
Attendant callers. For each VRS Message
programmed to answer outside calls, specify:
The digit the Automated Attendant caller
dials (1~12, where 10 = 0, 11 =* and 12 =
#). (Keep in mind that if you assign
destinations to digits three and four, outside
callers cannot dial system extensions that
begin with that digit.)
The destination reached (four digits
maximum) when the caller dials the single
digit code.
Maximum of eight digits
No Setting
25-07-01
System Timers for VRS/DISA VRS/DISA
Dial Tone Time
After answering a VRS/DISA trunk, the system
waits this time for the caller to dial the first digit
of the DISA password. If the caller fails to dial in
this time, the system drops the call.
0 ~ 64800 seconds
10
25-07-02
System Timers for VRS/DISA VRS/DISA No
Answer Time
A VRS/DISA caller can ring an extension for
this time before the system sets the call as a
Ring No Answer. After this time expires, the call
follows the programmed Ring No Answer
routing (set in Program 25-03 and Program
25-04).
0 ~ 64800 seconds
0
25-07-04
System Timers for VRS/DISA Calling Time
to Automatic Answering Telephone Set
Set the answering waiting time of the automatic
answering extension when an incoming DID
trunk call is received.
0 ~ 64800 seconds
10
25-07-05
System Timers for VRS/DISA Duration
Time for Guidance Message by Automatic
Answering Telephone Set
Set the announcement time of the automatic
answering extension before an incoming DID
trunk caller is disconnected.
0 ~ 64800 seconds
10
25-07-06
System Timers for VRS/DISA Duration
Time for Guidance Message by ACI
Set the announcement time by the ACI before
an incoming DID trunk caller is disconnected.
0 ~ 64800 seconds
10
25-07-11
System Timers for VRS/DISA VRS/DISA
Answer Delay Time
Set the time the system waits after receiving an
incoming VRS/DISA call before the system
automatically answers the call.
0 ~ 64800 seconds
0

Table of Contents

Other manuals for NEC Univerge SV9100

Related product manuals