NEC Univerge SV9100 - To Activate DID Call by Time Schedule

373
Operation
DID calls ring extensions like normal trunk calls.
To Activate DID Call by Time Schedule:
1. At any display multiline terminal, press Speaker.
2. Dial the Dial-In Mode Switching Service Code (Default = Not assigned).
- OR -
Press the Dial-In Mode Switching Programmable Function key (Program 15-07-01, 88, or SC
851 Key Code 88).
3. Dial 1~100/ 500 (table number).
4. Dial the Time Pattern 1~8.
LED Flash Patterns
Time Pattern LED Appearance
Pattern 1
Off
Pattern 2
On
Pattern 3
Slow Flash
Pattern 4
Fast Flash
Patterns 5~8
Off