NEC Univerge SV9100 - Page 417

417
Program
Number
Program Name/Description
Input Data
Default
32-01-02
Door Box Timers – Door Lock Cancel Time
Set the time the Door Box strike stays open
when the single line telephone user
hookflashes or a multiline terminal user presses
Recall.
0 ~ 64800 seconds
10
32-01-03
Door Box Timers – Off-Premise Call Forward
by Door Box Disconnect Timer
Define the conversation time for an Off-Premise
Call Forward by Door Box call. When this timer
expires, the caller hears busy tone for 3
seconds (fixed time), and the call is then
disconnected.
0 ~ 64800 seconds
60
32-02-01
Door Box Ring Assignments
Determine which Door Box should ring which
extension by entering the extension number.
Each Door Box can be programmed to ring up
to 32 extensions and an extension can be
programmed to ring for multiple Door Boxes.
Maximum of eight digits
No Setting
32-03-01
Door Box Basic Setup – Chime Pattern
0 = None
Door Box 1 = 1
Set the chime pattern (0 ~ 6) for each Door
1 = Door Box Ring 1
Door Box 2 = 2
Box.
2 = Door Box Ring 2
Door Box 3 = 3
3 = Door Box Ring 3
4 = Door Box Ring 4
Door Box 4 = 4
Door Box 5 = 5
5 = Door Box Ring 5
Door Box 6 = 6
6 = Door Box Ring 6
Door Box 7 = 1
Door Box 8 = 1
32-03-02
Door Box Basic Setup – CODEC Transmit
Gain Setup
Set the Transmit Gain for each Door Box.
1 ~ 63 (-15.5dB ~ +15.5dB)
32
32-03-03
Door Box Basic Setup – CODEC Receive
Gain Setup
Set the Receive Gain for each Door Box.
1 ~ 63 (-15.5dB ~ +15.5dB)
32
32-04-01
Door Box Name Setup – Door Box Name
Define the name of each Doorphone.
Maximum of 12 characters
No Setting