NEC Univerge SV9100 - Page 431

431
Program
Number
Program Name/Description
Input Data
Default
12-03-01
Weekly Night Service Switching
Assign one of the 10 Time Patterns
programmed in Program 12-02-01 to each day
of the week.
Night Mode Service Group
Numbers: 01 ~ 32
Time Schedule Pattern Number:
1 ~ 10
Day of Week:
01 = Sunday
(Time Pattern 2)
02 = Monday
(Time Pattern 1)
03 = Tuesday
(Time Pattern 1)
04 = Wednesday
(Time Pattern 1)
05 = Thursday
(Time Pattern 1)
06 = Friday
(Time Pattern 1)
07 = Saturday
(Time Pattern 2)
12-04-01
Holiday Night Service Switching
Assign one of the 10 Time Patterns to holidays.
Days and Months:
0101 ~ 1231
(e.g. 0101 = Jan. 1; 1231 = Dec.
31)
Time Pattern Number:
0 ~ 10
(0 = No Setting)
No Setting
15-02-18
Multiline Telephone Basic Data Setup –
Power Saving Mode
Enable/disable the ability of each terminal to cut
power when the system is running on battery
backup following a loss of power.
0 = Normal Mode
1 = Power Saving Mode
(Eco-Mode)
1
15-07-01
Programmable Function Keys
Assign a function key as a Power Saving key
(code #6) 01 - 16: Power Saving Group
Number
00: All Groups
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
15-27-02
Power Save Setup – Power Off When Power
Failure
Assign power cut or no power cut for each
extension when the system loses power and
runs on battery backup.
Maximum of eight digits
0 = Disable
1 = Enable (Power Cut)
0
20-02-10
System Options for Multiline Telephones –
Time Before Shifting to Power Saving Mode
System-wide timer that determines how long a
multiline terminal is idle before shifting into the
Power Saving mode.
0 = Disable
1 = 1 minute
2 = 2 minutes
3 = 4 minutes
4 = 8 minutes
5 = 16 minutes
6 = 32 minutes
7 = 64 minutes
0
20-53-01
Night Mode Group Assignment for Power
Save Group – Night Mode Service Group
Number
Assigns the Night Mode Service group number
into the Power Save group.
Power Save Group Number
1 ~ 16
Night Mode Service group
number 1 ~ 32
1