NEC Univerge SV9100 - Page 44

44
Related Features
 Background Music
 Contact Centre
 Hotline
 One-Touch Calling
 Paging, External
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
10-03-01
ETU Setup (DLCA PKG Setup) – Terminal
Type (B1)
Assign or display the current terminal type
assigned to B Channel 1 for each port on the
DLCA.
0 = Not set
1 = Multiline Terminal
3 = Bluetooth Cordless Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
0
10-03-06
ETU Setup (DLCA PKG Setup) – Terminal
Type (B2)
Assign or display the current terminal type
assigned to B Channel 2 for each port on the
ESI.
0 = Not set
6 = PGD(2)-U10 ADP (Paging)
7 = PGD(2)-U10 ADP (Tone
Ringer)
8 = PGD(2)-U10 ADP (Door
Box)
9 = PGD(2)-U10 ADP (ACI)
12 = APR (B2 Mode)
0
11-06-01
ACI Extension Numbering
Assign extension numbers to ACI software
ports. Select a number outside of the normal
extension number range.
Maximum of eight digits.
ACI Ports: 1 ~ 96
No Setting
11-08-01
ACI Group Pilot Number
Assign pilot numbers to ACI groups. When a
user dials the pilot number, they reach an
available ACI software port within the group.
Dial (maximum of eight digits).
ACI Groups 1 ~ 16
No Setting
14-09-01
Conversation Recording Destination for
Trunks – ACI Recording Destination
Extension Number
Assign the ACI Call Recording destination per
trunk. The destination can be an ACI port
extension number (assigned in Program
11-06-01) or an ACI Department Group pilot
number (assigned in Program 11-08-01). If
destinations are assigned in Program 14-09
and Program 15-12, the destination in Program
15-12 is followed.
Extension Number = Maximum
eight digits
No Setting