498
Service Code Setup (for Service Access) –
Tandem Trunking
With two trunks in Conference press the Hold
key and dial #8 and the Conference/Tandem
happens.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
Service Code Setup (for Service Access) –
Transfer Into Conference
If required, change the service code used to
transfer a call into a Conference call.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
Service Code Setup (for Service Access) –
Trunk Drop Operation for SLT
Customize the trunk drop operation for SLT
Service Codes which are used for service
access.
SLT
0 ~ 9,
*
, # Maximum of eight
digits
Service Code Setup (for) – LogIn/Log Out
(for KTS)
Assign for multiline terminals and single line
telephones.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
Service Code Setup (for) – Log Out (for SLT)
Assign for single line telephones.
SLT
0 ~ 9,
*
, # Maximum of eight
digits
Service Code Setup (for) – Set Wrap-Up
Time (for SLT)
Assign for single line telephones.
SLT
0 ~ 9,
*
, # Maximum of eight
digits
Service Code Setup (for) – Cancel
Assign for single line telephones.
SLT
0 ~ 9,
*
, # Maximum of eight
digits
Service Code Setup (for) – Set Off Duty (for
SLT)
Assign for single line telephones.
SLT
0 ~ 9,
*
, # Maximum of eight
digits
Service Code Setup (for) – Cancel Off Duty
(for SLT)
Assign for single line telephones.
SLT
0 ~ 9,
*
, # Maximum of eight
digits
Service Code Setup (for) – Agent ID Code
Login
Assign to allow an AIC Agent to log into a
group.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
Service Code Setup (for) – Agent ID Code
Logout
Assign to allow an AIC Agent to log out of a
group.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
Service Code Setup (for) – Agent Login by
Supervisor
Assign to allow a Supervisor to log into a group.
MLT
0 ~ 9,
*
, # Maximum of eight
digits