NEC Univerge SV9100 - Page 510

510
Program
Number
Program Name/Description
Input Data
Default
20-31-21
Timer Class Timer Assignment – DISA
Internal Paging Time
Set the maximum time of an Internal Page
placed by a DISA caller. If the Page continues
longer than this time, the system terminates the
DISA call.
0 ~ 64800 seconds
30
20-31-22
Timer Class Timer Assignment – DISA
External Paging Time
Set the maximum time of an External Page
placed by a DISA caller. If the Page continues
longer than this time, the system terminates the
DISA call.
0 ~ 64800 seconds
30
20-31-23
Timer Class Timer Assignment – Page
Announcement Duration
Set the maximum time for Page
announcements. (Affects External Paging only).
0 ~ 64800 seconds
1200
21-01-02
System Options for Outgoing Calls –
Intercom Interdigit Time
Set the time-out time for DID callers that do not
dial. After this time, the DID call routes
according to Vacant Number Intercept
programming.
0 ~ 64800 seconds
10
21-01-03
System Options for Outgoing Calls – Trunk
Interdigit Time (External)
Program the time an extension user must wait
before the Barge-In feature can be used on a
call (this time expires before a call is put in a
talk state). This time also affects Voice Over.
0 ~ 64800 seconds
5
21-01-09
System Options for Outgoing Calls –
Ringdown Extension Timer (Hotline Start)
After the user lifts the handset, the extension
automatically calls the ringdown destination
after this time. A setting of 0 immediately rings
the programmed extension. Any other setting
delays the ringdown the time programmed.
0 ~ 64800 seconds
5
22-01-03
System Options for Incoming Calls – Ring
No Answer Alarm Time
Set the Ring No Answer Alarm time. If a trunk
rings a multiline terminal longer than this time,
the system changes the ring cadence.
0 ~ 64800 seconds
60
22-01-04
System Options for Incoming Calls – DIL No
Answer Recall Time
A DIL that rings its programmed destination
longer than this time, diverts to the DIL No
Answer Ring Group (set in Program 22-08).
0 ~ 64800 seconds
0