NEC Univerge SV9100 - Page 555

555
Guide to Feature Programming
 The items highlighted in gray are read only and cannot be changed.
Refer to the UNIVERGE SV9100 Hotel/Motel Services Manual for complete programming information.
Program
Number
Program Name/Description
Input Data
Default
10-20-01
LAN Setup for External Equipment – TCP
Port
Define the TCP port (0 ~ 65535) when
communicating to the SMDR (type 5).
0 ~ 65535
External Device
1 (CTI Server) =
0
External Device
2 ( MIS) = 4000
External Device
5 (SMDR
Output) = 0
External Device
6 (DIM Output) =
0
External Device
11 (O&M Server)
= 8010
External Device
12 (Traffic
Report Output) =
0
External Device
13 (Room Data
Output for Hotel
Service ) = 0
11-10-16
Service Code Setup (for System
Administrator) – Leaving Message Waiting
(Requires CPU to be licensed for Hotel/
Motel)
Customize the leave message waiting Service
Codes for the System Administrator
(GCD-CP10 must be licensed for Hotel/Motel).
MLT
0 ~ 9,
*
, # Maximum of eight
digits
726
11-14-01
Service Code Setup (for Hotel) – Set DND for
Own Extension
Customize the set DND for own extension used
with the Hotel/Motel feature (GCD-CP10 must
be licensed for Hotel/Motel).
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
727
11-14-02
Service Code Setup (for Hotel) – Cancel
DND for Own Extension
Customize the cancel DND for own extension
used with the Hotel/Motel feature (GCD-CP10
must be licensed for Hotel/Motel).
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
728
11-14-03
Service Code Setup (for Hotel) – Set DND for
Other Extension
Customize the set DND for other extension
used with the Hotel/Motel feature (GCD-CP10
must be licensed for Hotel/Motel).
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
729
11-14-04
Service Code Setup (for Hotel) – Cancel
DND for Other Extension
Customize the cancel DND for other extension
used with the Hotel/Motel feature (GCD-CP10
must be licensed for Hotel/Motel).
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
730