NEC Univerge SV9100 - Page 724

724
Feature Support Table for Standard SIP Device (Continued)
Feature Name
Standard
SIP
Comments
Department Calling
No
Department Step Calling
Yes
Department Group All Ring
Yes
Dial Pad Confirmation Tone
No
Dial Tone Detection
No
Dialing Number Preview
Yes
Direct Inward Dialing (DID)
Yes
Direct Inward Line (DIL)
Yes
Direct Inward System Access (DISA)
No
Direct Station Selection (DSS) Console
No
Directed Call Pickup
Yes
Directory Dialing
No
Distinctive Ringing, Tones and Flash Patterns
No
Do Not Disturb
Yes
Do Not Disturb (DND) can be set from the SIP device
using dial access codes. In some cases Do Not Disturb
can be set via the SIP device but is not system side DND.
Do Not Disturb/Call Forward Override
Yes
Door Box
Yes
Door Box will not ring a SIP device. A SIP device can call
a door box but cannot activate the relay.
Drop Key
No
D
term
Handset Cordless
No
D
term
IP Gateway System
No
E-911 Compatibility
No
Electra Elite Terminal Migration
No
Facsimile CO Branch Connection
No
Flash
No
Flexible System Numbering
Yes
Flexible Timeouts
Yes
Forced Trunk Disconnect
No
Group Call Pickup
Yes
Group Listen
No
Handset Mute
Yes
Handset mute is a function of the SIP device.
Handset Operation
Yes
Handsfree and Monitor
Yes
Handsfree is a feature of the SIP device.