NEC Univerge SV9100 - Page 786

786
Program
Number
Program Name/Description
Input Data
Default
10-12-10
GCD-CP10 Network Setup – Subnet Mask
Define the Subnet Mask for the VoIPDB unit.
128.0.0.0 | 192.0.0.0 | 224.0.0.0
|240.0.0.0 | 248.0.0.0 | 252.0.0.0
|254.0.0.0 | 255.0.0.0
|255.128.0.0 | 255.192.0.0
|255.224.0.0 | 255.240.0.0
|255.248.0.0 | 255.252.0.0
|255.254.0.0 | 255.255.0.0
|255.255.128.0 | 255.255.192.0
|255.255.224.0 | 255.255.240.0
|255.255.248.0 | 255.255.252.0
|255.255.254.0 | 255.255.255.0
|255.255.255.128
|255.255.255.192
|255.255.255.224
|255.255.255.240
|255.255.255.248
|255.255.255.252
|255.255.255.254
|255.255.255.255
255.255.0.0
10-28-01
SIP System Information Setup – Domain
Name
Define the Domain name. This information is
generally provided by the SIP carrier.
Maximum of 64digits.
(Profile 1 ~ Profile 2)
No Setting
10-28-02
SIP System Information Setup – Host Name
Define the Domain name. This information is
generally provided by the SIP carrier.
Maximum of 48 digits.
(Profile 1 ~ Profile 2)
No Setting
10-28-03
SIP System Information Setup – Transport
Protocol
Define the Transport type. This option is always
set to UDP.
0 = UDP
1 = TCP
(Profile 1 ~ Profile 2)
0
10-29-01
SIP Server Information Setup – Default
Proxy (Outbound)
Define the SIP Proxy setup, Default Proxy
(Outbound). When SIP trunking is used, this
must be on.
If entries are made in Program 10-29-xx for an
SIP Server and the SIP Server is removed or not
used, the entries in Program 10-29-xx must be set
back to their default settings. Even if Program
10-29-01 is set to 0 (off), the UNIVERGE SV9100
still checks the settings in the remaining 10-29
programs.
0 = Off
1 = On
(Profile 1 ~ Profile 2)
0
10-29-02
SIP Server Information Setup – Default
Proxy (Inbound)
Define the Default Proxy (Inbound).
0 = Off
1 = On
(Profile 1 ~ Profile 2)
0