NEC Univerge SV9100 - Page 793

793
Restrictions for Calling Party Names
Protocols Name Delivery Formats
NI-2
Facility Information Elements
4ESS (AT&T Custom)
Not Supported
AT&T5ESS Lucent Custom
Facility Information Element
DMS-100 (Custom) *
Display Information Element *
DMS-100 (National; ISDN) **
Facility Information Element **
* Nortel Specification NIX-A211-1
** Nortel Specification NIS-A233-1
CO Line Service is not supported
ISDN – PRI cannot be configured for CO Emulation
B-Channel to Trunk Association
When an Incoming ISDN-BRI/PRI call is received, the system assigns the lowest trunk
number of the ISDN circuit to the incoming call associated with the B-Channel. When
an Outgoing call is placed using the ISDN-PRI/BRI, the system assigns the Trunk and
B-Channel association according to the chart below. This is based on the Trunk-to-
Trunk Group and Trunk Group Priority assignment in (Program 14-05-01).
Refer to the charts below for examples:
Incoming Call
Station User
Talking on TK009
Incoming call from the
Network on Channel 30. In most
cases, the Network will control/select
the B-Channel used for an incoming call.
Trunk
Number
B-Channel
Number
9
1
10
2
11
3
12
4
13
5
14
6
15
7
16
8
17
9
18
10
19
11
20
12
21
13
22
14
…30
…30