885
Basic Trunk Data Setup – Trunk-to-Trunk
Outgoing Caller ID through Mode
Enable/Disable the ability to send the original
Caller ID through.
0 = Disable (No)
1 = Enable (Yes)
Programmable Function Keys
Assign a function key for Barge-In (code 34).
Optional additional data can be assigned as
extension number or
*
.
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
Mobile Extension Setup – Mobile Extension
Target Setup
For each Mobile Extension number, select the
Abbreviated Dial bin number to be associated
with it.
0 ~ 9999
(0 = No setting
1 ~ 9999 = target of mobile
extension)
Mobile Extension Setup – Connect
Confirmation
As the Mobile Extension can be a GSM phone,
it is necessary to be certain a person and not,
for example, a GSM voice mail has answered
the call. This is achieved by returning Music on
Hold/ring tone to the Mobile Extension on
answer, after which the Mobile Extension user
presses
*
to connect the call.
For each Mobile Extension number, select
whether the user needs to use DTMF
confirmation before a call is answered. Until the
*
is pressed, the call is treated as not being
answered.
0 = Always
1 = On analog line
2 = Never
Mobile Extension Setup – Trunk Access
Code
Select whether the Normal or Individual Trunk
access is used when making the call to the
mobile number.
0 = Use normal trunk access
code (Program 11-09-01)
1 = Use individual trunk access
code (Program 11-09-02)
Mobile Extension Setup – Call Back
Select whether or not the system will try to call
back a mobile extension user.
0 = Don’t call back
1 = Call back
System Options – Mobile Extension
Callback Duration Time
Determines the amount of time the system will
call back a mobile extension user before
abandoning the call.
System Options – Progress Tone for Mobile
Extension Setting
Select whether the Progress Tone (1) or
Ringback (0) is played to the Internal Caller
until the call to the Mobile Extension is setup.
To Next Page
Loading...
