939
Guide to Feature Programming
System Options – Operator Access Mode
Set up priority of a call when calling an operator
telephone (0 = Step, 1 = Circular).
Operator Extension – Operator’s Extension
Number
Designate an extension an operator. When an
extension user dials 0 or 9 (defined by Program
11-01, Type 5), calls go to the operator selected
in this program.
If you do not assign an extension in Program
90-11-01, system alarms appear on the
extension assigned in this option.
Extension’s Operator Setting
Assign an extension to an operator group.
Trunk’s Operator Setting
Allow the user to select Operator Group per
trunk.
0 ~ 15
(0 = Not assigned)
Operator Extension Group Setup
Define the initial operator extension in the
operator group.
0 ~ 9,
*
, # Maximum of eight
digits
Operator Group Setting – Operator Access
Mode
Set up priority of a call when calling an operator
telephone.
Operation
Refer to the individual features for operation.
To Next Page
Loading...
