NEC Univerge SV9100 - Page 952

952
Program
Number
Program Name/Description
Input Data
Default
31-04-01
External Paging Zone Group
Assign each External Paging Speaker to an
External Paging Group (1 ~ 8) used for
accessing the zone. If zones 1 ~ 8 are not
connected to PGD(2)-U10 ADP, set these
unused zones to External Paging Group 0.
0 ~ 8 (0 = No Setting)
Speaker 1
[PGD(2)-U10] =
1 (Group 1)
Speaker 2
[PGD(2)-U10] =
2 (Group 2)
Speaker 3
[PGD(2)-U10] =
3 (Group 3)
Speaker 4
[PGD(2)-U10] =
4 (Group 4)
Speaker 5
[PGD(2)-U10] =
5 (Group 5)
Speaker 6
[PGD(2)-U10] =
6 (Group 6)
Speaker 7
[PGD(2)-U10] =
7 (Group 7)
Speaker 8
[PGD(2)-U10] =
8 (Group 8)
Speaker 9
(GCD-CP10) = 1
(Group 1)
31-05-01
Universal Night Answer/Ring Over Page
Assign Universal Night Answer ringing to each
External Paging zone. For each trunk port,
make a separate entry for each External Paging
Speaker.
External Paging Speaker/Zones:
1 ~ 9
0 = No Ringing (No)
1 = Ringing (Yes)
0
31-06-01
External Speaker Control – Broadcast
Splash Tone before Paging (Paging Start
Tone)
Enable/Disable splash tone before Paging over
an external zone. If enabled, the system
broadcasts a splash tone before the External
Paging announcement.
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
2
31-06-02
External Speaker Control – Broadcast
Splash Tone after Paging (Paging End Time)
Assign option for each External Paging
Speaker (1 ~ 9).
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
2
31-06-04
External Speaker Control – CODEC Transmit
Gain Setup
Define the CODEC transmitting gain settings
for the external speaker using an amplifier.
1 ~ 63 (-15.5 ~ +15.5dB)
32
31-06-05
External Speaker Control – CODEC Receive
Gain Setup
Select the CODEC gain types (1 ~ 32) for each
External Page Speaker.
External Paging Speaker/Zone:
1 ~ 9
1 ~ 63 (-15.5 ~ +15.5dB)
32