NEC Univerge SV9100 - Chapter 11 NAPT; Section 1 NAPT; Section 2 Conditions; Section 3 Restrictions - Static NAT

UNIVERGE SV9100 Issue 1.2
System Hardware Manual - ix
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual ix
___________________________________________________________________________________
6.1.3 LED Indications ........................................................................4-88
6.1.3.1 Active LED – Green ............................................................4-88
6.1.3.2 Busy LED – Red .................................................................4-89
6.1.3.3 Application LED – Red/Green (Dual Color) ........................4-89
6.1.3.4 CompactFlash Card Activity LED – Red .............................4-89
6.1.4 Connectors ...............................................................................4-89
6.1.4.1 RS-232 Interface ................................................................4-89
6.1.4.2 DB9 to 6-pin Modular RS-232 Adapter ...............................4-90
6.1.4.3 RS-232 Serial Cable (DTE) ................................................4-90
6.1.4.4 RS-232 Serial Cable (DCE) ................................................4-91
6.1.4.5 USB Interface .....................................................................4-91
6.1.4.6 VGA Display Interface ........................................................4-91
6.1.4.7 10 Base-T/100 Base-TX Ethernet Interface .......................4-91
6.2 CD-PVAA (Packet Voice Application) ........................................ 4-93
6.2.1 Description ...............................................................................4-93
6.2.2 Installation ................................................................................4-94
6.2.3 Switch Settings ........................................................................4-94
6.2.4 LED Indications ........................................................................4-94
6.2.5 Connectors ...............................................................................4-95
6.3 GCD-RGA (Application Gateway) ............................................. 4-96
6.3.1 Description ...............................................................................4-96
6.3.2 Installation ................................................................................4-98
6.3.3 Switch Settings ........................................................................4-98
6.3.4 Status LEDs .............................................................................4-99
6.3.5 LED Indications ........................................................................4-99
6.3.6 Connectors .............................................................................4-100
6.4 CD-ETIA (Gigabit PoE Switch) ................................................ 4-101
6.4.1 Description .............................................................................4-101
6.4.2 Installation ..............................................................................4-102