UNIVERGE SV9100 Issue 1.2
System Hardware Manual 3 - 43
4. Connect the ground wire to all chassis. Refer to 1.1.3 Install
Grounding on 19” Chassis on page 3-13 for complete details on
grounding the system.
5. Refer to 1.1.5 Install AC Power Cords on 19” Chassis on page 3-15 to
continue installation of the chassis or, Chapter 6 paragraph 2.1
Installation and Safety Precautions on page 4-3 for installation of
blades.
4.1.2 Multiple CHS2UG Chassis Installation
Expansion chassis (maximum of three) can be added to the CHS2UG
STAND KIT (K) and require an additional CHS2UG STAND KIT (EXT) per
chassis.
Figure 3-55 Secure Stand Mount to Floor with Screws
To Next Page
Loading...
