UNIVERGE SV9100 Issue 1.2
System Hardware Manual 4 - 17
3.1.1 Description
The GCD-CP10 controls all the functions and operations of the
SV9100 system using the system software loaded into the
GCD-CP10 memory. The system software can be upgraded as new
software becomes available.
One GCD-CP10 blade must be installed in the Controlling Chassis.
The GCD-CP10 functions are:
Music on Hold tone Circuit, External Source Control Circuit
Voice Mail/VRS interface Circuit
VM Recording time
SD-A1 memory card: 12 hours
SD-B1 memory card: 115 hours
Figure 4-4 GCD-CP10 Blade with Daughter Boards Installed
To Next Page
Loading...
