UNIVERGE SV9100 Issue 1.2
System Hardware Manual 5 - 81
9. Align the projections on the bottom of the 8LKD
(LD)-L UNIT into the guide holes on top of the
multiline terminal.
10. Slide the 8LKD (LD)-L UNIT toward the keypad
buttons until snug (refer to Figure 5-80 8LKD (LD)-L
UNIT Installed).
Figure 5-79 Ribbon Cable Installed
Figure 5-80 8LKD (LD)-L UNIT
Installed
To Next Page
Loading...
