UNIVERGE SV9100 Issue 1.2
System Hardware Manual 5 - 85
9. Align the projections on the bottom of the 8LKI
(LD)-L UNIT into the guide holes on top of the
multiline terminal (refer to Figure 5-85 Ribbon Cable
Installed).
10. Slide the 8LKI (LD)-L UNIT toward the keypad
buttons until snug (refer to Figure 5-86 8LKI (LD)-L
UNIT Installed).
Figure 5-85 Ribbon Cable Installed
Figure 5-86 8LKI (LD)-L UNIT
Installed
To Next Page
Loading...
