UNIVERGE SV9100 Issue 1.2
System Hardware Manual 5 - 99
5.2.12 DSS WM-L UNIT
The DSS WM-L UNIT (Wall Mount Unit) is used to attach the DCL-
60-1/DCZ-60-2 CONSOLE to the wall. This unit connects to the
bottom of the terminal.
5.2.12.1 Mount DCL-60-1/DCZ-60-2 CONSOLE on Wall using
DSS WM-L UNIT
Use the template shown in Figure 5-108 Wall Mount
Spacing Guide (DSS WM-L UNIT) for required spacing
before drilling.
1. Attach the DSS WM-L UNIT to the wall using six screws or,
using two wall mounted screws (refer to Figure 5-109 Attach
Figure 5-108 Wall Mount Spacing Guide (DSS WM-L UNIT)
To Next Page
Loading...
